RV Tip of the Day

It’s Normal For an RV Water Pump to Pulsate

center>

When not hooked up to an external supply, fresh water must be pumped from the on-board RV water tank using an RV water pump. When the power is switched on, the pump works automatically whenever a faucet is turned on. It’s normal for the pump to pulsate.

The water pump is preset to keep a more-or-less constant water pressure. When the pump senses a drop in pressure, because you’re using water, it runs long enough to restore the pressure and then shuts off. Depending on the demand for water that pressure can be restored rapidly causing the pulsing.

You can install a device called an accumulator tank that will minimize the pulsating. There RV water pumps models available that claim to eliminate the pulsation and noise… ask your RV tech.

Lean more about RV Water Pump Basics.

————-
The RV Care & Maintenance DVD addresses issues like: information on the proper care and maintenance for the interior of your RV, the exterior of your RV, RV appliances, LP gas system, water system, electrical system, RV generators, RV batteryís, chassis & frame and RV tires. Let RV expert Mark Polk, help you to thoroughly understand how to take care of your RV. Watch as many times as you need to.
————–

 
 
Exit mobile version