Most of the places we go we just plug into the 30 amp spots. My question is, would it hurt anything if we plug into the 50 amp spots? At one of the campgrounds we want to go to the best spots are 50 amp.
I suspect if we could remember back when most RVs were wired to use 20 amp service and manufacturers were beginning to build RVs with 30 amp service we would see the same confusion when campgrounds started to upgrade power pedestals with 30 amp receptacles.
When RV Parks and Campgrounds label a site as 50 amps it simply means the site has 50 amp service available. That important to know for RVers who have rigs wired for 50 amps but it doesn’t mean that 30 amp or even 20 amp service isn’t available at the site as well. Ninety-Nine percent of the time the ’50 amp’ power pedestal will have all three outlets… 50, 30 and 20 amp … available.
The 50 amp and 30 amp power outlets are not the same so on the rare occasion when 30 amp service is not available you will have to use a 50 amp to 30 amp adapter if you still want use the site.
See: Using a 50 to 30 Amp RV Power Cord Adapter at RVbasics.com for more information.
————-
“RV Electrical Systems: A Basic Guide to Troubleshooting, Repairing and Improvement” covers both AC and DC electrical systems and is another must have. Excellent 12 volt coverage and the best source on 120 volt AC systems. If it’s not covered in this book, you can probably get along without it. The authors go into extraordinary detail without getting into engineering “lingo” and they tell you things nobody else does, and those things many authors assume you already know — that you don’t. RV Electrical Systems is available at Amazon.
————-